Description

The lamp is shaped,
With a motion sensor,
Easy installation,
3 operating modes,
Easy installation,
Adjustable lighting angles (horizontal 360 degrees and vertical 90 degrees),
a red light indicator (simulation of the camera on) is available.
1 mode: simulate the camera blue-red, light is lit 100% only when the sensor detects movement in the fixation field and extinguishes as soon as a movement in the field stops, the simulation is back on. Mode 2: simulate camera recording blue-red and light is lit at 50% power, light is lit at 100% when the sensor detects movement in the fixation field and the light becomes dim and extinguishes after 20 ~ 25 seconds only when movement in this field is stopped, the simulation is resumed and the light is lit at 50% power. Mode 3: the camera simulates blue-red and light at 50% in the dark regardless of movement and automatically turns off in the daylight.
Characteristics: Description:
Mode: 877a, 877b, 977t
Solar panel: 5.5 v 1.87 w Max
Number of led: 77
Modes: three modes.
Material: abs plastic
Built-in battery: 3.7v / 4800mah.
Water resistance: ip65
Motion sensor range: 3-5 m
Battery capacity: 4800 mah
Lighting Angle: 120 degrees
Charging time: 8 hours

What’s in the box
1 x Solar simulation small wall lamp
1 x Installation kit